Search for: All records

Abstract This study presented the use of SrTiO₃/Y₂O₃nanoparticles for the reinforcement of dental poly(methyl methacrylate) (PMMA) to enhance its mechanical properties important for everyday use of denture base materials. The average crystallite size of prepared nanoparticles was 19.9 nm. The influence of 0.5, 1.0, and 1.5 wt% SrTiO₃/Y₂O₃loading on absorbed impact energy, microhardness and tensile properties was investigated. Scanning electron microscopy of the composite fracture surface revealed multiple toughening mechanisms, with agglomerates directly included in the crack pinning, indicating improvement in mechanical performance. Dynamic mechanical analysis proved that agglomerates improved the elastic behavior of PMMA and confirmed the absence of a residual monomer. After the incorporation of SrTiO₃/Y₂O₃, the mechanical properties of composites showed a high increase compared to neat PMMA. The optimal concentration of nanoparticles was 1 wt%, for which the microhardness, modulus of elasticity, and absorbed impact energy were higher by 218.4%, 65.8% and 135.6%, respectively. With such a high increase, this research showed that SrTiO₃/Y₂O₃represents an efficient filler which use does not have to be limited to dental materials. HighlightsSrTiO₃/Y₂O₃hybrid nanoparticles were prepared.PMMA‐SrTiO₃/Y₂O₃composite showed increase in impact resistance up to 135.4%.Elastic behavior of PMMA was improved.With 1 wt% of SrTiO₃/Y₂O₃, microhardness increased by 218.4%. 

BaTiO 3 (BTO) is considered the most commonly used ceramic material in multilayer ceramic capacitors due to its desirable dielectric properties. Considering that the miniaturization of electronic devices represents an expanding field of research, modification of BTO has been performed to increase dielectric constant and DC bias characteristic/sensitivity. This research presents the effect of N 2 and air atmospheres on morphological and dielectric properties of BTO nanoparticles modified with organometallic salt at sintering temperatures of [Formula: see text]C, [Formula: see text]C, [Formula: see text]C, and [Formula: see text]C. Measured dielectric constants were up to 35,000, with achieved very high values in both atmospheres. Field emission scanning electron microscopy (FESEM) was used for morphological characterization, revealing a porous structure in all the samples. The software image analysis of FESEM images showed a connection between particle and pore size distribution, as well as porosity. Based on the data from the image analysis, the prediction of dielectric properties in relation to morphology indicated that yttrium-based organometallic salt reduced oxygen vacancy generation in N 2 atmosphere. DC bias sensitivity measurements showed that samples with higher dielectric constant had more pronounced sensitivity to voltage change, but most of the samples were stable up to 100 V, making our modified BTO a promising candidate for capacitors.